Ricoh D067, Service Manual

Page: 218 / 676

Using SP Mode (Basic: D067/D072)
D067/D068/D069/D072 6-26 SM
6.3.4 SMC PRINT (SP5-990)
SP5-990 outputs machine status lists.
1. Select SP5-990.
2. Select a menu:
ƒ 001 All, 002 SP, 003 User Program, 004 Logging Data, or 005 Big Font
ƒ The output given by the menu “Big Font” is suitable for faxing.
3. Press the “Execute” key.
ƒ The copy mode is activated ( "Using SP and SSP Modes” in this section”).
Specify copy settings and press the key. The machine status lists its output.
4. To return to the SP mode, press the key.
6.3.5 SERIAL NUMBER INPUT (SP5-811-001)
Specifying Characters
SP5-811-001 specifies the serial number. For the basic model (the machine without the
controller box), you use the numeric keypad.
A serial number consists of 11 characters. You can change each character by pressing one
of the first 11 keys on the numeric keypad.
You can specify a digit (“0” to “9”) or a capital letter (“A” to “Z”) for the first four characters of
a serial number, and you can specify a digit in the other seven characters (not capital
letters).
Serial Number and NVRAM
Serial numbers are stored in the NVRAM before shipment and are not cleared by any
program. You must specify a serial number after you replace the NVRAM.