Ricoh D067, Service Manual

Page: 472 / 676

System Service Mode (Basic: D067/D072)
SM Appendix 5-163 D067/D068/D069/D072
Appe
ndix:
SP
Mode
Ta
bles
SP5-XXX (Mode)
5001
All Indicators On
5001 1
Turns on all LEDs. The LCD turns on or off every 3 seconds. Press the reset
key to end this program.
5045* Display-Counter
[0 or 1 / 0 / - ]
0: 1 counter, 1: 2 couters
5045 1 Displays the number of the installed couter.
5113* Optional Counter Type
0: None
1: Key
2: Key Card20–
11: Key Card4+
12: Key Card4–
5113 1 Selects the corresponding key for installed devices such as coin lock.
5120* Clear-OP Count Remove [ 0 =Yes / 1=Standby only / 2=No]
5120 1
Specifies the condition to reset the copy job settings when the key counter is
removed.
ƒ 0: Y = Yes: The settings are cleared when the counter is removed.
ƒ 1: StdBy = Standby only: The settings are cleared when the counter is
removed at the end of a job.
ƒ 2: N = No: The settings are not cleared under either condition.
As for duplex copying, the job settings are always preserved regardless of
these setting.