Ricoh D067 Service Manual Download Page 470

Page: 470 / 676

System Service Mode (Basic: D067/D072)

SM Appendix

5-161

D067/D068/D069/D072

Appe

ndix:

Mode

bles

Texture Removal

4926*

Adjusts the texture removal level that is used with error diffusion. 0: The

default value for each mode is used. Text 1, Photo 2, Special 2, and Special 5

have a default of 3 and Photo 1, 3 have a default of 6.

1: No removal applied.

2 – 6: Removal applied at the level specified here. The higher the setting

(level), the less clear the image will become (more texture removal). This

setting is only applied to the originals in SP4-921.

4926 1 Copy

[0 to 6 /

/ 1/step]

Line Width Correction

4927*

Adjusts the line width correction algorithm. Positive settings produce thicker

lines; negative settings produce thinner lines. This setting is only applied to

the originals in SP4-921.

4927 1 Copy

[–2 to 2 /

/ 1/step]

Independent Dot Erase

4928*

Selects the dot erase level. Higher settings provide greater erasure. This

setting is only applied to the originals in SP4-921.

4928 1 Copy

[–2 to 2 /

/ 1/step]

4929*

Positive/Negative

[

= No, 1 = Yes]

4929 1 Copy

Inverts white and black. This setting is only

applied to the originals in SP4-921.

Summary of Contents for D067





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands

Ricoh D067, Service Manual

Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands