Ricoh D067 Service Manual Download Page 518

Page: 518 / 676

Fax Error Codes

SM Appendix

6-19

D067/D068/D069/D072

Appe

ndix:

Fax T

rou

ble-

shooting

Guide

Code

Meaning

Suggested Cause/Action

14-16

Maximum Division Number

Error

When a mail is divided for the mail

transmission and the division number of a mail

are more than the specified number, the mail

transmission is interrupted.

Update the software because of the defective

software.

14-17 Incorrect

Ticket

Update the software because of the defective

software.

14-18 Access to MCS File Error

The access to MCS file is denied due to the no

permission of access.

Update the software because of the defective

software.

14-30 MCS File Creation Failed

Failed to create the MCS file because:

The number of files created with other

applications on the Document Server has

exceeded the limit.

HDD is full or not operating correctly.

Software

error.

14-31 UFS File Creation Failed

UFS file could not be created:

Not enough space in UFS area to handle both

Scan-to-Email and IFAX transmission.

HDD full or not operating correctly.

Software

error.

14-32

Cancelled the Mail Due to

Error Detected by NFAX

Error detected with NFAX and send was

cancelled due to a software error.

Summary of Contents for D067





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands

Ricoh D067, Service Manual

Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands