Ricoh D067 Service Manual Download Page 282

Page: 282 / 676

SC Tables (F/SPF: D068/D069)

SM Appendix

3-27

D067/D068/D069/D072

Appe

ndix:

Service Call

Conditio

HDD Encryption unit error 2

859

A serious error occurs when the HDD data is encrypted to update an

encryption key with the HDD encryption unit.

[8]

HDD check error:

The HDD is not correctly

installed.

No HDD installed

Unformatted

HDD

The encryption key on the

controller is different from the

one on the HDD

1. Install the HDD correctly.

2. Initialize

the

HDD.

[9]

Power failure during the data

encryption:

The data encryption (NVRAM

and HDD) has not been

completed.

Power failure during the data

encryption

1. Initialize

the

HDD.

[10]

Data read/write error:

The DMAC error is detected

twice or more.

Same as SC863

HDD: Initialization error

860

The controller detects that the

hard disk fails.

HDD not initialized

Defective

HDD

1. Reformat the HDD.

1. Replace

the

HDD.

Bad sector number error

862

The number of bad sectors in

the HDD (image data area)

goes over 101.

Defective

HDD

1. Format the HDD with

SP5-832-002.

2. Replace

the

HDD.

Summary of Contents for D067





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands

Ricoh D067, Service Manual

Search results

Summary of Contents for D067

Reviews:

Brands by name

Popular brands