manualshive.com logo in svg

Ricoh D009, Service Manual

Share
Download
Ricoh D009 Service Manual Download Page 409

SP5-xxx: Mode-4 

SM 5-123 

D009/D011/D012/D013 

Service 

Ta

bles 

LDAP Search Timeout   

010 

Sets the length of the time-out for the search of the LDAP server. 

[1 to 255 / 

60

 /1 step] 

Addr Book Migration (USB -> HDD) 

040 

This SP moves the address book data from the SD card or flash ROM on the 

controller board to the HDD. You must cycle the machine off and on after 

executing this SP. 

1.  Turn the machine off. 

2.  Install the HDD. 

3.  Turn the machine on. 

4. Do 

SP5846 

040. 

5.  Turn the machine off/on. 

 

ƒ

 

Executing this SP overwrites any address book data already on the 

HDD with the data from the flash ROM on the controller board. 

ƒ

 

We recommend that you back up all directory information to an SD 

card with SP5846-051 before you execute this SP. 

ƒ

 

After the address book data is copied to HDD, all the address book 

data is deleted from the flash ROM. If the operation fails, the data is 

not erased from the flash ROM. 

041  Fill Addr Acl Info. 

 

This SP must be executed immediately after installation of an HDD unit in a 

basic machine that previously had no HDD. The first time the machine is 

powered on with the new HDD installed, the system automatically takes the 

address book from the NVRAM and writes it onto the new HDD. However, 

the new address book on the HDD can be accessed only by the system 

administrator at this stage. Executing this SP by the service technician 

immediately after power on grants full address book access to all users. 

Procedure

 

1.  Turn the machine off. 

2.  Install the new HDD. 

3.  Turn the machine on. 

4.  The address book and its initial data are created on the HDD 

Summary of Contents for D009














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands