Ricoh D009, Service Manual

Page: 1009 / 1165

Fax Communication Features
SM 163 D346
Fax Op
tion
Ty
pe 5
000
D34
6
Protocol
Even if the MX record on the DNS server includes the IFAX, mail cannot be received
with SMTP until SMTP reception is enabled:
However, if SMTP reception is selected and the machine is not registered in the MX
record of the DNS server, then either IMAP4 or POP3 is used, depending on the
setting: User Tools> System Settings> File Transfer> Reception Protocol
Mail Delivery Conditions: Transferring Mail Received With SMTP
1. The machine must be set up for SMTP mail delivery: User Tools> Facsimile Features>
E-mail Settings> SMTP RX File Delivery Settings
2. If the user wishes to limit this feature so that the machine will only deliver mail from
designated senders, the machine’s “Auth. E-mail RX” feature must be set (User Tools>
Facsimile Features> E-mail Settings> SMTP RX File Delivery Settings).
3. If the “SMTP RX File Delivery Setting” is set to 0 to prohibit SMTP receiving, and if
there is mail designated for delivery, then the machine responds with an error. (User
Tools> Facsimile Features> E-mail Settings> SMTP RX File Delivery Settings)
4. If the quick dial, speed dial, or group dial entry is incorrect, the mail transmission is lost,
and the IFAX issues an error to the SMTP server and outputs an error report.
Auth. E-mail RX
In order to limit access to mail delivery with IFAX, the addresses of senders must be limited
using the Access Limit Entry. Only one entry can be registered.
1. Access Limit Entry
For example, to limit access to @IFAX.ricoh.co.jp:
gts@IFAX.ricoh.co.jp Matches and is delivered.
gts@IFAX.abcde.co.jp Does not match and is not delivered.
IFAX@ricoh.co.jp Does not match and is not delivered.
2. Conditions
ƒ The length of the Access Limit Entry is limited to 127 characters.
ƒ If the Access Limit Entry address and the mail address of the incoming mail do not
match, the incoming mail is discarded and not delivered, and the SMTP server
responds with an error. However, in this case an error report is not output.
ƒ If the Access Limit Entry address is not registered, and if the incoming mail
specifies a delivery destination, then the mail is delivered unconditionally.