Ricoh D009, Service Manual

Page: 1115 / 1165

Printer and P/S Options
SM 11 D381
Printer/
Scanner
Option
D38
1
enhance options, the order of execution is not important.
1. Turn off the copier.
2. Remove the cover ( x1).
3. Confirm that the RPCS Unit or Printer Unit SD card is in SD card Slot 1 .
4. Put the option SD Card (Printer Enhance Option or Scanner Enhance Option) in SD
card slot 2 .
5. Open the front door.
6. Turn the copier on.
7. Go into the SP mode and select SP5873-001 .
8. Touch "Execute".
9. Read the instructions on the display and touch "Execute" to start.
10. When the display tells you copying is completed, touch "Exit", then turn the copier off.
11. Remove the option SD card from slot 2 .
12. Turn the copier on.
13. Go into the User Tools mode and confirm that update was successful.
14. User Tools> System Settings> Administrator Tools> Firmware Version> Next
15. Turn the copier off again, then reattach the cover.
16. Return the copied SD card to the customer for safekeeping, or tape it to the faceplate
of the controller.
To undo an option update
1. Turn the main switch off.
2. Confirm that the RPCS Unit or Printer Unit SD card is in SD card Slot 1 .
3. Put the original option SD card (Printer Enhance Option or Scanner Enhance Option)
in SD card slot 2 .
4. Turn the main switch on.
5. Go into the SP mode and do SP5873-002 (Undo Exec).
6. Follow the messages on the operation panel to complete the procedure.
7. Turn the main switch off.
8. Remove the option SD card from Slot 2 .
9. Turn the main switch on.
10. Go into the User Tools mode and confirm that undo was successful.
User Tools> System Settings> Administrator Tools> Firmware Version> Next
11. Turn the copier off again, then reattach the cover.
Important Notes about SD Cards
Here are some basic rules about merging applications on SD cards.