Ricoh Aficio MP C2030 Service Manual Download Page 27

Page: 27 / 1171

Read This First

Important Safety Notices

Responsibilities of the Customer Engineer

Customer Engineer

Maintenance shall be done only by trained customer engineers who have completed

service training for the machine and all optional devices designed for use with the machine.

Reference Material for Maintenance

Maintenance shall be done using the special tools and procedures prescribed for

maintenance of the machine described in the reference materials (service manuals,

technical bulletins, operating instructions, and safety guidelines for customer

engineers).

In regard to other safety issues not described in this document, all customer engineers

shall strictly obey procedures and recommendations described the "CE Safety Guide".

Use only consumable supplies and replacement parts designed for use of the

machine.

Before Installation, Maintenance

Shipping and Moving the Machine

Work carefully when lifting or moving the machine. If the machine is heavy, two or

more customer engineers may be required to prevent injuries (muscle strains,

spinal injuries, etc.) or damage to the machine if it is dropped or tipped over.

Personnel moving or working around the machine should always wear proper

clothing and footwear. Never wear loose fitting clothing or accessories (neckties,

loose sweaters, bracelets, etc. ) or casual footwear (slippers, sandals, etc.) when

lifting or moving the machine.

Always unplug the power cord from the power source before you move the product.

Before you move the product, arrange the power cord so it will not fall under the

product.

Power

Always disconnect the power plug before doing any maintenance procedure. After

switching off the machine, power is still supplied to the main machine and other

Summary of Contents for Aficio MP C2030




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP C2030

Reviews:

Related manuals for Aficio MP C2030

Brands by name

Popular brands

Ricoh Aficio MP C2030, Service Manual

Search results

Summary of Contents for Aficio MP C2030

Reviews:

Related manuals for Aficio MP C2030

Brands by name

Popular brands