Ricoh Aficio MP C2030, Service Manual

Page: 653 / 1171

System Service Mode
SM Appendix 9-119 D037/D038/D040/D041
Appe
ndix:
SP
Mode
Ta
bles
when toner density is detected to be low at the toner density adjustment.
C-pattern: C *ENG [0 to 255 / 5 / 1 time/step]
010
Specifies the belt mark generating time for checking the magenta toner density
when toner density is detected to be low at the toner density adjustment.
C-pattern: M *ENG [0 to 255 / 5 / 1 time/step]
011
Specifies the belt mark generating time for checking the cyan toner density
when toner density is detected to be low at the toner density adjustment.
C-pattern: Y *ENG [0 to 255 / 5 / 1 time/step]
012
Specifies the belt mark generating time for checking the yellow toner density
when toner density is detected to be low at the toner density adjustment.
T1 Bias: Bk *ENG [0 to 80 / 10 / 1 µA/step]
013
Adjusts the image transfer belt bias for Black.
T2 Bias: C *ENG [0 to 80 / 10 / 1 µA/step]
014
Adjusts the image transfer belt bias for Cyan.
T3 Bias: M *ENG [0 to 80 /
10 / 1 µA/step]
015
Adjusts the image transfer belt bias for Magenta.
T4 Bias: Y *ENG [0 to 80 / 10 / 1 µA/step]
016
Adjusts the image transfer belt bias for Yellow.
Developer Agitation Time *ENG [0 to 250 /
10 / 1 sec/step]
017
Specifies the developer mixing time at the toner density adjustment.
C-Pattern: LD: DUTY: Bk *ENG [0 to 15 / 15 / 1 /step]
018
Adjusts the LD duty for the toner consumption mode at the toner density
adjustment.
In toner consumption mode, toner is discharged when the detected
development gamma values (SP3611-001) exceed the target values
(SP3611-005) by more than the specified thresholds (SP3239-009).