Ricoh Aficio MP C2030 Service Manual Download Page 158

Page: 158 / 1171

Controller Options

D037/D038/D040/D041 2-108

9. Insert the SD card in the SD card slot 2 of the machine and turn the main power on.

Starting the application

1. Press the “User Tools/Counter” key, then press the “Extended Feature Settings” button

and press the “Extended Feature Setting” button that appears. If required, log in as a

machine administrator.

2. Press “Startup”, then change the status to “Starting up” for each application.

3. Press “Administrator Tools”, then press “Heap/Stack Size Settings”. Program the heap

size and stack size as the settings as before.

4. Turn the main power off and on.

5. Enter the “Extended Feature Settings” menu again, and check the version of the VM

card firmware on the “Extended Feature Info” screen.

The version of the VM card firmware is also shown on the Self Diagnostic Report

(a part of the SMC report). But the version on the Self Diagnostic Report is not

changed after updating.

2.22.12 BROWSER UNIT TYPE E (D038/D041 ONLY)

IMPORTANT:

Whenever installing an SDK application on this model (e.g. the VM Card or

Browser Unit), the

Memory Unit Type I: 512MB

must also be installed.

Installation Procedure

IMPORTANT

: The Browser Option can only be installed on one machine. Once the

installation is complete it cannot be installed on any other machine after that, even if it is

uninstalled from the original machine.

1. For models which have the VM card, do the following. Then

continue with step 3:

- Press “User tools” button to enter the User Tools mode.

- Press “Extended Feature Settings” on the LCD.

- Press “Extended Feature Settings” on the LCD again.

- Press “Start up” tab.

- Stop all SDK applications with touching application lines.

- Exit UP mode, turn off the machine and unplug the power cord

- Remove the slot cover for SD cards.

- Remove the SD card (VM/JAVA) from SD slot 2.

2. Turn off the machine and unplug the main machine power cord.

3. Turn the Browser SD card label face to the rear of the machine. Then push it slowly

into the slot until you hear a click.

⇒

Rev. 10/13/2011

Summary of Contents for Aficio MP C2030




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP C2030

Reviews:

Related manuals for Aficio MP C2030

Brands by name

Popular brands

Ricoh Aficio MP C2030, Service Manual

Search results

Summary of Contents for Aficio MP C2030

Reviews:

Related manuals for Aficio MP C2030

Brands by name

Popular brands