Ricoh Aficio MP C2030, Service Manual

Page: 1051 / 1171

Error Codes
SM 25 D432/D433
D
432
/D
43
3
Fax Op
tion
Ty
p
e
C25
50/C253
0
Code Meaning Suggested Cause/Action
received at the other end
after all communication
attempts at 2400 bps
ƒ Adjust the tx level (use NCU parameter 01 or
the dedicated tx parameter for that address).
ƒ Check the line connection.
ƒ Defective remote terminal.
6-21
V.21 flag detected during
high speed modem
communication
ƒ The other terminal may be defective or
incompatible.
6-22
The machine resets the
sequence because of an
abnormal handshake in the
V.34 control channel
ƒ Check for line noise.
ƒ If the same error occurs frequently, replace the
FCU.
ƒ Defective remote terminal.
6-99
V.21 signal not stopped
within 6 s
ƒ Replace the FCU.
13-17
SIP user name registration
error
ƒ Double registration of the SIP user name.
ƒ Capacity for user-name registration in the SIP
server is not sufficient.
13-18 SIP server access error
ƒ
Incorrect initial setting for the SIP server.
ƒ Defective SIP server.
13-24 SIP authentication error
ƒ Registered password in the device does not
match the password in the SIP server.
13-25 Network I/F setting error
ƒ IPV4 is not active in the active protocol setting.
ƒ IP address of the device is not registered.
13-26
Network I/F setting error at
power on
ƒ Active protocol setting does not match the I/F
setting for SIP server.
ƒ IP address of the device is not registered.
13-27 IP address setting error ƒ IP address of the device is not registered.
14-00 SMTP Send Error
ƒ
Error occurred during sending to the SMTP
server. Occurs for any error other than 14-01
to 16. For example, the mail address of the