Ricoh Aficio MP C2030 Service Manual Download Page 316

Page: 316 / 1171

Service Program Mode

D037/D038/D040/D041 5-4

2. If you need to perform a test print, press Copy Window to open the copy window and

select the settings for the test print. Press Start



and then press SP Mode

(highlighted) in the copy window to return to the SP mode display.

3. Press Exit two times to return to the copy window when you are finished.

Service Mode Lock/Unlock

At locations where the machine contains sensitive data, the customer engineer cannot

operate the machine until the Administrator turns the service mode lock off. This function

makes sure that work on the machine is always done with the permission of the

Administrator.

1. If you cannot go into the SP mode, ask the Administrator to log in with the User Tool

and then set “Service Mode Lock” to OFF after he or she logs in:

User Tools > System Settings > Administrator Tools > Service Mode Lock > OFF

This unlocks the machine and lets you get access to all the SP codes.

The CE can service the machine and turn the machine off and on. It is not

necessary to ask the Administrator to log in again each time the machine is turned

on.

2. Go into the SP mode and set SP5169 to “1” if you must use the printer bit switches.

3. After machine servicing is completed:

Change SP5169 from “1” to “0”.

Turn the machine off and on. Tell the administrator that you have completed

servicing the machine.

The Administrator will then set the “Service Mode Lock” to ON.

5.1.3 TYPES OF SP MODES (D037/D040)

System SP: SP modes related to the engine functions

Printer SP: SP modes related to the controller functions

Scanner SP: SP modes related to the scanner functions

Fax SP: SP modes related to the fax functions

Select one of the Service Program modes (System, Printer, Scanner, or Fax) from the

operation panel as shown in the diagram below after you access the SP mode. This section

explains the functions of the System/Printer/Scanner SP modes. Refer to the Fax service

manual for the Fax SP modes.

Summary of Contents for Aficio MP C2030




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP C2030

Reviews:

Related manuals for Aficio MP C2030

Brands by name

Popular brands

Ricoh Aficio MP C2030, Service Manual

Search results

Summary of Contents for Aficio MP C2030

Reviews:

Related manuals for Aficio MP C2030

Brands by name

Popular brands