Ricoh Aficio MP C2030, Service Manual

Page: 1042 / 1171

Error Codes
D432/D433 16 SM
Code Meaning Suggested Cause/Action
Cable equalizer - G3 Switch 07 (PSTN)
Dedicated Tx parameters in Service Program
Mode
0-05
Modem training fails even
G3 shifts down to 2400
bps.
ƒ Check the line connection.
ƒ Try adjusting the tx level and/or cable
equalizer.
ƒ Replace the FCU.
ƒ Check for line problems.
Cross reference
See error code 0-04.
0-06
The other terminal did not
reply to DCS
ƒ Check the line connection.
ƒ Try adjusting the tx level and/or cable
equalizer settings.
ƒ Replace the FCU.
ƒ
The other end may be defective or
incompatible; try sending to another machine.
ƒ Check for line problems.
Cross reference
See error code 0-04.
0-07
No post-message
response from the other
end after a page was sent
ƒ Check the line connection.
ƒ Replace the FCU.
ƒ The other end may have jammed or run out of
paper.
ƒ The other end user may have disconnected
the call.
ƒ Check for a bad line.
ƒ The other end may be defective; try sending to
another machine.
0-08
The other end sent RTN or
PIN after receiving a page,
because there were too
many errors
ƒ Check the line connection.
ƒ Replace the FCU.
ƒ The other end may have jammed, or run out of
paper or memory space.