Ricoh Aficio MP C2030, Service Manual

Page: 1048 / 1171

Error Codes
D432/D433 22 SM
Code Meaning Suggested Cause/Action
after an unsuccessful
primary channel.
channel because data reception in the primary
channel was not successful.
ƒ This does not result in an error
communication.
0-88
The line was disconnected
because PPR was
transmitted/received 9
(default) times within the
same ECM frame.
ƒ Try using a lower data rate at the start.
ƒ Try adjusting the cable equalizer setting.
2-11
Only one V.21 connection
flag was received
ƒ Replace the FCU.
2-12 Modem clock irregularity ƒ Replace the FCU.
2-13 Modem initialization error
ƒ
Turn off the machine, then turn it back on.
ƒ Update the modem ROM.
ƒ Replace the FCU.
2-23
JBIG compression or
reconstruction error
ƒ Turn off the machine, then turn it back on.
2-24 JBIG ASIC error ƒ Turn off the machine, then turn it back on.
2-25
JBIG data reconstruction
error (BIH error)
2-26
JBIG data reconstruction
error (Float marker error)
2-27
JBIG data reconstruction
error (End marker error)
2-28
JBIG data reconstruction
error (Timeout)
ƒ JBIG data error
ƒ Check the sender’s JBIG function.
ƒ Update the MBU ROM.
2-29
JBIG trailing edge maker
error
ƒ FCU defective
ƒ Check the destination device.