Ricoh Aficio MP C2030, Service Manual

Page: 1054 / 1171

Error Codes
D432/D433 28 SM
Code Meaning Suggested Cause/Action
14-08
Data Send to SMTP Server
Failed (5XX)
ƒ Failed to access the SMTP server because the
transmission failed.
ƒ SMTP server operating incorrectly
ƒ Destination folder setting incorrect.
ƒ Direct SMTP sending not operating correctly.
ƒ Software application error.
14-09
Authorization Failed for
Sending to SMTP Server
ƒ POP-Before-SMTP or SMTP authorization
failed.
ƒ Incorrect setting for file transfer
14-10 Addresses Exceeded
ƒ
Number of broadcast addresses exceeded the
limit for the SMTP server.
14-11 Buffer Full
ƒ The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
14-12 Data Size Too Large
ƒ Transmission was cancelled because the
detected size of the file was too large.
14-13 Send Cancelled
ƒ Processing is interrupted because the user
pressed Stop.
14-14 Security Locked File Error
ƒ Update the software because of the defective
software.
14-15 Mail Data Error
ƒ The transmitting a mail is interrupted via DCS
due to the incorrect data.
ƒ Update the software because of the defective
software.
14-16
Maximum Division Number
Error
ƒ When a mail is divided for the mail
transmission and the division number of a mail
are more than the specified number, the mail
transmission is interrupted.
ƒ Update the software because of the defective