Ricoh Aficio FT4027, Service Manual

Page: 583 / 685

Mode No. Function Settings
5-802-001
to
5-802-002
Free Run Mode Performs the free run
SP5-802-001: Continuous free run
SP5-802-002: One time free run
Before starting, close the platen or
ARDF. Press the
key to start the
free run. Press the key to stop the
free run.
5-803
Input Check
Mode † Displays the data received from sensors
and switches. For details, see
Service Tables
section 2.5.
5-804
Output Check
Mode Turns on the electrical components
individually for test purposes. For details, see
Service Tables
- section 2.6.
°5-810
SC Reset † Resets any service call condition that
was caused by a level A error (see the
Troubleshooting section).
After doing SP5-810, turn the copier
main switch off and on.
5-811
Machine Serial No. Input †
For use with features that are available in Japan only
°5-812
Telephone
Number Input †
(A207 copier
only) Use this to input the telephone number
of the service representative (this is
displayed when a service call condition
occurs.) Maximum 16 digits. Press the "
•
"
key to input a pause (–).
Press the
key to delete the input
telephone number.
°5-816
RDS/CSS Function Setting †
For use in Japan only. Do not change the factory setting.
5-817
Repair Time Transmission †
For use in Japan only. Do not change the factory setting.
°5-905
APS A4/LT
Sideways
Priority † Specifies whether the machine selects
LT sideways paper if the original is A4.
If "ON" is selected, LT sideways copy
paper is selected automatically when the
APS sensors detect an A4 sideways
original. This feature does not work in
reverse (A4 sideways paper is not
selected for an LT sideways original). 0: OFF
1: ON
•
°5-906
Manual Staple
Reset Time
Setting † Sets the manual staple reset time.
(1 second per step [Range: 1 to 999]) 1 ~ 999
Default = 20 s
After the end of a copy job in sort mode,
manual staple mode is reset
automatically when the manual staple
reset time has passed.
SERVICE PROGRAM MODE
A207/A208/A211 1-80 SM