Ricoh Aficio FT4027, Service Manual

Page: 580 / 685

Mode No. Function Settings
•
°5-107-001
to
5-107-004
Image Shift
Margin
Adjustment † This controls the left and right margin
width adjustment for both 1st and 2nd
side copies.
SP5-107-001: Left Margin (1st side)
SP5-107-002: Right Margin (1st side)
SP5-107-003: Left Margin (2nd side)
SP5-107-004: Right Margin (2nd side) A4 version
0 ~ 15
Default = 5
LT version
0 ~ 0.60
Default = 0.20
SP5-908 must be at 2 for this to have
any effect; this changes the function of
the Erase key to a Margin Adjustment
key.
A4 version: 1 mm per step
[Range: 0 mm to 15 mm]
LT version: 0.01" per step
[Range: 0" to 0.60"]
•
°5-108
Edge Erase
Margin
Adjustment † Adjusts the edge erase margin width in
erase edge mode. A4 version
1: 5 mm
2: 10 mm
LT version
1: 0.20"
2: 0.40"
SP5-908 must be at 1 for this to have
any effect. A strip of the selected width
will be erased around the edges of the
copy image.
•
°5-110
Center Erase
Margin
Adjustment † Adjusts the center erase margin width in
erase center mode. A4 version
8 ~ 25
Default = 20
LT version
0.32 ~ 1.00
Default = 0.80
SP5-908 must be at 1 for this to have
any effect.
A4 version: 1 mm per step
Range: 8 mm to 25 mm]
LT version: 0.01" per step
[Range: 0.32" ~ 1.00"]
°5-113
Coin Lock
Installation † Specifies whether coin lock is installed or
not (only for Japanese versions). 0: Not installed
1: Installed
5-115
Duplex Image
Shift †
(Back Side
Margin) Specifies whether duplex image shift
(back side margin) is used or not. 0: NO
1: YES
If "YES" is selected, an 5 mm margin is
made on the right of the reverse side of
copies when making two-sided copies
from one-sided originals.
If the image shift mode has been
selected with SP5-908 and if the user
uses image shift mode, this SP mode
has no effect.
°5-121
T/C (Total
Counter) Count
Up Timing † Determines whether the total counter
counts up at paper feed or at paper exit. 0: Feed
1: Exit
•
°5-122
OHP Slip
Sheet Mode
Selection † Selects whether to have an image on the
OHP slip sheet or not. 0: Blank
1: Image
5-127
APS Detection
† Selects whether APS detection is done
or not. 0: NO
1: YES
Overall
Machi
ne
In
fo
rm
a
ti
o
n
SERVICE PROGRAM MODE
SM 1-77 A207/A208/A211