Ricoh Aficio FT4027, Service Manual

Page: 582 / 685

Mode No. Function Settings
•
°5-407-001
to
5-407-002
User Code
Number Clear † Deletes user code numbers.
SP5-407-001: Deletes individual user
code numbers. Enter the
required user code at the
numeric keys, then press
the
$
key. (To see which
user codes are being used,
use SP5-405.)
SP5-407-002: Deletes all the user code
numbers.
°5-408
Number of
Registered
User Codes
Display † Displays the number of registered user
codes in the reduce/enlarge indicator.
•
° 5-410
User Code
Reset Time
Setting † Selects the user code reset time in
one-second steps. This is the time that
the current user code remains active
after the end of the copy job. 1 ~ 999
Default = 60
°5-501-001
PM Interval
Setting † Sets the PM interval.
(1,000 copies per step [Range: 1 to 999]) 1 ~ 999
120: Type 1
100: Type 2
°5-501-002
PM Interval
Setting
(PM Alarm
Mode Setting) † Specifies whether PM alarm mode is on
or off. 0: OFF
1: ON
If PM alarm mode is on, the manual ID
level/ADS indicator and copy counter
blink when the PM counter reaches the
PM interval.
5-504
RDS/CSS Alarm Level for Paper Jam (Paper Jam Alarm Level Setting) †
Used in Japan only. Do not change the factory setting.
5-505
RDS/CSS Alarm Level for SC (Service Call Alarm Level Setting) †
Used in Japan only. Do not change the factory setting.
°5-507
RDS/CSS Alarm Level for Supplies (Supply Alarm Mode Setting) †
Used in Japan only. Do not change the factory setting.
5-801
Memory All
Clear † Resets all the correction data for process
control and all software counters, and
returns all modes and adjustments to the
default settings.
See Service Tables - section 2.2.4 for
how to perform this SP mode.
Normally, this SP mode should not be
performed.
This SP mode is required only when
replacing the RAM board, or when the
copier malfunctions due to a damaged
RAM board.
Overall
Machi
ne
In
fo
rm
a
ti
o
n
SERVICE PROGRAM MODE
SM 1-79 A207/A208/A211