Ricoh Aficio FT4027, Service Manual

Page: 578 / 685

Mode No. Function Settings
•
°4-902
APS 8 k/16 k
Detection †
(A4 versions
only) Selects whether the machine can select
8 k/16 k copy paper based on APS
sensor readings.
If "YES" is selected, 8 k/16 k copy paper
is selected under the following conditions: 0: NO
1: YES
If "YES" is selected, the duplex end
fence must be removed to allow the 8 k/
16 k movement of the jogger fences.
•
°5-001
All Indicators
ON † Turns on all indicators on the operation
panel for 10 seconds. It can be manually
turned off by pressing the
key.
•
°5-002
Feed Station
Priority
Selection † Selects the paper feed station priority. 1 ~ 6: Non
duplex
machines
1 ~ 5: Duplex
machines
Default = 1
(without LCT)
Default = LCT
(5 or 6)
(with LCT)
•
°5-003
APS Priority
Selection † Specifies whether the copier defaults to
APS or manual mode when the main
switch is turned on, auto reset, or mode
cleared. 1: APS
0: Manual
Also see
SP6-010.
•
°5-004
ADS Priority
Selection † Specifies whether the copier defaults to
ADS or manual ID mode when the main
switch is turned on, auto reset, or mode
cleared. 1: ADS
0: Manual
•
°5-013
Counter
Up/Down
Selection † Selects whether the counter counts up or
down. 1: Up
2: Down
•
°5-017
Maximum Copy
Quantity (Copy
Limit) † Limits the maximum copy quantity that
can be entered. 1 ~ 999
Default = 999
Size detected by
APS
Selected copy paper size
B4 lengthwise
8 k lengthwise
(267 mm x 390 mm)
A4 lengthwise
16 k lengthwise
(267 mm x 195 mm)
B5 sideways
16 k sideways
(115 mm x 267 mm)
Setting
Non duplex
machines
Duplex machines
1 1st Tray 1st Tray
2 2nd Tray 2nd Tray
3 3rd Tray 3rd Tray
4 4th Tray 4th Tray
5 5th Tray LCT
6 LCT —
Overall
Machi
ne
In
fo
rm
a
ti
o
n
SERVICE PROGRAM MODE
SM 1-75 A207/A208/A211