Ricoh Aficio FT4027, Service Manual

Page: 569 / 685

Mode No. Function Settings
1-105-001
Fusing
Temperature
Adjustment
(Main Fusing
Lamp) † Adjusts the temperature of the main
fusing lamp, which heats the central area
of the hot roller.
The selected temperature is displayed in
the reduce/enlarge indicator. 170 ~ 190
Default = 185
(Type 1)
Default = 180
(Type 2)
(1°C per step [Range: 170°C to 190°C])
1-105-002
Fusing
Temperature
Adjustment for
Energy Saver
Mode † Adjusts the temperature of the fusing unit
in energy saver mode.
(SP5-102 and SP5-305 are also related
to Energy Saver Mode.)
The lower the fusing temperature is, the
greater the energy saving ratio is and the
longer the waiting time until the copier
returns to the ready condition.
Default = 1
(NA)
Default = 0
(Others)
1-105-003
(Type 2
only)
Fusing
Temperature
Adjustment
(Secondary
Fusing Lamp) † Adjusts the temperature of the
secondary fusing lamp, which heats both
ends of the hot roller. 170 ~ 190
Default = 175
(1°C per step [Range: 170°C to 190°C])
1-106-001
Fusing
Temperature
Display (Main
Fusing Lamp) † Displays the temperature (°C) at the
surface of the central area of the hot
roller, as measured by the thermistor.
The temperature in energy saving mode
cannot be displayed, as entering SP
mode takes the machine out of this
mode.
1-106-002
(Type 2
only)
Fusing
Temperature
Display
(Secondary
Fusing Lamp) †
Displays the temperature (°C) at the
surface of the ends of the hot roller, as
measured by the thermistor.
The temperature in energy saving mode
cannot be displayed, as entering SP
mode takes the machine out of this
mode.
1-108
Forced Start † Selects whether forced start is on or off. 0: OFF
1: ON
If forced start is switched on, the copier
enters the ready condition even if the
fusing temperature has not reached the
required value yet. Use this for tests if
the room temperature is low and you do
not wish to wait for the lamps to warm up.
SP Setting Type 1 Type 2
0 185°C 175°C
1 170°C 145°C
SERVICE PROGRAM MODE
A207/A208/A211 1-66 SM