manualshive.com logo in svg

Ricoh Aficio Color 4006, Service Manual

Share
Download
Ricoh Aficio Color 4006 Service Manual Download Page 463

24 February 1999

SC CODES

27

SC

No.

Item

Detection Conditions

Possible Causes

Related

SCs

Troubleshooting Procedure

Type

SC630 RDS

communica-
tion error

- Timing & Condition -
The main control board
receives no response from
RDS when accessing it.

Even when this error is
detected, the copier does not
show the SC code and this SC
code is not logged. (Copier
functions are still working.)

•

 Poor 

connection 

or

damaged cable

•

 Defective 

line

adapter

•

 Defective

CSS/bank interface
board

•

 Defective 

main

control board

1. Check that the cables are properly connected on the

CSS/bank interface board and main control board or
check if the cables are damaged.

2. Check and/or change the setting of the line adapter or

replace it.

3. Replace the CSS/bank interface board.
4. Replace the scanner IPU board.

SC690 Application

selection error

- Timing & Condition -
When the main CPU
communicates with CPUs on
other PCBs, the main CPU
does not receive response
from the others.

•

  Scanner IPU

firmware upgrade

•

 Poor 

connection 

of

connectors

•

 Defective 

scanner

IPU board

•

 Defective 

main

control board

•

  Main boards of

options

•

  If this SC code is displayed after the scanner IPU

firmware is changed, the IC card may still be in the slot.
Turn the main switch off and on after removing the IC
card.

1.  Check if the connectors on the main control board,

scanner IPU board, and the main board on each option
are properly connected.

2.  Replace the defective boards.

B

SC720 Sorter main

motor error

The main motor pulse output
state remains unchanged for
300 ms at start time, or for
100 ms during operation.

Defective motor

Defective motor: Test with SP5-804-120. Replace if
necessary.

D

SC721 Sorter bin

motor error

The bin HP sensor has not
turned off 2,550 ms after the
bin goes up from the home
position.

Defective sensor
(including connectors),
defective motor, or
motor overload

Defective bin HP sensor: Check connections. Test using
SP5-803-124/125 (input check: bin home/bin rotation).
Replace the sensor if necessary.
Overload: Check the mechanism, including the gears.
Defective bin drive motor: Test with SP5-804-124.
Replace if necessary.

D

Summary of Contents for Aficio Color 4006








































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands