DRUM UNIT
24 February, 1999
6-16
6.2.5 LUBRICANT BAR REPLACEMENT
1. Remove the drum unit and place it in the work area (see “Drum Replacement”).
2. Remove the cleaning unit from the drum unit (2 screws) (see “Cleaning Blade
and PCC Wire Replacement).
3. Remove the cleaning blade (see “Cleaning Blade and PCC Wire
Replacement”).
4. Turn up the pressure release lever [A] (1 spring).
5. Remove the lubricant holder [B] (2 screws).
6. Slide out the front end of the holder [D] and remove the lubricant bar [C].
NOTE: The lubricant bar springs [E] can
be installed in two positions. When
installing a new lubricant bar, place
the springs in the deeper position.
If cleaning problem should occur.
Change the position of the springs
to compensate for the wear of the
lubricant bar.
A259R208.WMF
A259R218.WMF
[A]
[B]
[C]
[D]
[E]
[E]
[E]
Summary of Contents for Aficio Color 4006
