Ricoh 4430NF, Operating Instructions Manual

Page: 51 / 120

Scan Settings
45
2
❒
This machine can make copies and
send fax messages at
Extra Super
Fine resolution, but it cannot re-
ceive faxes that are sent at Extra
Super Fine resolution.
❒
When sending with Extra Super
Fine , turn on the ”Ex. Super Fine”
with the User Parameters (switch
20, bit 2). See p.140 “User Parame-
ters”,
Advanced Features .
Note
❒
You can check the resolution type
with the Journal.
❒
When turning on the "Ex. Super
Fine" with the User Parameters
(switch 20; bit 2), sending or re-
ceiving faxes on multiple lines
may not be possible. Copies and
received documents may not be
printed either.
❒
300 x 300 dpi can be used with the
scanner function. When sending
fax messages with 300 x 300 dpi,
the machine switches to
Detail
au-
tomatically.
❒
You can set the resolution type af-
ter the power is turned on or the
{
Energy Saver/Clear Modes
}
key is
pressed with the User Parameters
(switch 00; bit 5,4). See p.140 “User
Parameters”,
Advanced Features .
A
Press the
{
Resolution
}
key to
switch between resolutions.
The indicators above the key show
the current selection.
Note
❒
When Detail and Super Fine
are lit at the same time, 300 x 300
dpi is selected.
Original Type
If your original contains photographs
or colored illustrations, select
Half-
tone to optimize image clarity.
When you select Color Scan , color
originals can be scanned with the
scanner function (optional). For de-
tails, see “Scanning a Color Original”
in the NIC FAX unit manual.
Note
❒
If you select Halftone , the trans-
mission will take longer than when
it is not selected.
❒
Color Scan cannot be selected with
fax transmission.
❒
You can set whether Halftone is se-
lected after the power is turned on
or the
{
Energy Saver/Clear Modes
}
key is pressed with the User Pa-
rameters (switch 00, bit 7). See
p.140 “User Parameters”,
Advanced
Features .
A
Press the
{
Original Type
}
key.
ZHMS190E
ZHMS090E
StellaF26_combine_F-GB_FM_forPaper.book Page 45 Tuesday, January 16, 2007 10:08 AM