Ricoh 4430NF, Operating Instructions Manual

Page: 42 / 120

Faxing
36
2
Memory Transmission
Memory Transmission is convenient
because:
• Fax originals can be scanned much
more quickly. Your fax is stored in
memory, and then sent automati-
cally, meaning you do not have to
wait for your original to be sent.
• While your fax is being sent, an-
other user can operate the machine
(people do not have to wait long to
use the fax machine).
• You can send the same original to
more than one place with the same
operation. (Broadcasting)
Important
❒
Make sure that 100% appears on
the display before you turn off the
power. If the power is turned off
for 12 hours or longer, all docu-
ments stored in memory are delet-
ed. As soon as the power is turned
on, the Power Failure Report is
printed to help you identify delet-
ed files. See p.174 “Power Failure
Report”,
Advanced Features .
Limitation
❒
If memory is full (0% appears on
the display), Memory Transmis-
sion is disabled. Use Immediate
Transmission instead.
Note
❒
Maximum number of destinations
per Memory Transmission: 250
❒
The maximum number of destina-
tions awaiting Memory Transmis-
sion that you can specify is 250.
❒
The theoretical maximum number
of destinations you can enter with
the number keys is 100, but this
will depend on the amount of
memory currently available.
❒
The number of pages that you can
store in memory depends on the
original images and the scan set-
tings. You can store up to 1280
standard pages (ITU-T #1 chart,
Resolution: Standard, Original
Type: Halftone Off).
❒
Maximum number of Memory
Transmission files: 250
A
Make sure that the Memory
Transmission indicator is lit.
If it is not lit, press the
{
Memory
Trans.
}
key.
B
Place the original.
Note
❒
Do not open the ADF while it is
scanning originals.
Reference
p.33 “Placing Originals”
C
Select any scan settings you re-
quire.
Reference
p.44 “Scan Settings”
ZHMS040E
StellaF26_combine_F-GB_FM_forPaper.book Page 36 Tuesday, January 16, 2007 10:08 AM