北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd
Forging ahead, create future together!
47
2)
Press “
” to enter file list, then press “
”move the cursor to choose
object file.
3)
Set processing parameters, also can modify the array parameters in this step, or you
can go to “AUTO PRO SETUP”, choose “Work Array” and modify the array
parameters. The rest steps are similar to the normal processing. System will start to
work according t
o the user‟s setting.
4)
In the processing of array work, you can view real time row number, volume number
etc. by pressing “
”.
Note
: Set interval value into a negative value if users want a manual control during array
processing.
5.7.2
Scale Work
If the actual processing requires different sizes of the same file, user can use “scale
work”, and enter a zoom in/out ratio.
Steps:
Press“
” to get into “Scale work”.
Choose desired processing file and input correct parameters:
And then press “
” to start processing.
Select File
选择
U
盘文件
Internal File
Recent File
U Disk File
U
WENJIAN
Scale Work
Y Scale 1
Z Scale 1
A Scale 1
X Scale 1
