北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd
Forging ahead, create future together!
28
TS Position:
①
Input Position (Mechanical coordinates of fixing tool setting, input the
actual position).
②
Manual Move (Manual selection when fixing tool setting).
C.A.D. Thickness (Unit: mm): The thickness should input actual value. If the input
value is bigger than the actual thickness, Z axis may over cut; if smaller, Z axis tool bit
can‟t reach workpiece surface. This parameter can only take effect when user uses auto
tool setting function. Invalid when manual set workpiece origin (press XY
→0, ZC→0
)
Fall height after tool setting: After tool setting finished, the pickup height of Z axis,
system default is 40.000 mm.
6) Motion Axis Set
Motor Dir: Modify the direction of motor rotation.
Axis Disable: If the user's machine is a two-axis machine, the Z-axis can be forbidden
here, then the screen will no longer display the Z-axis, and all Z-axis related parameters
will no longer be meaningful.
Neg Spd Limit: Set the maximum speed in the negative direction of the machine tool,
TS Spd
3000
TS Thk
0
TS HIT
40
TS Type
Touch
TS Pos
InSite
TS Query
None
