北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd
Forging ahead, create future together!
22
5) Work Orgn Offset:
CurOriginOffset: External offset is also named as workpiece offset, it is used to record
the temporary adjustment value of the current workpiece origin and only works in the
current coordinate.
CmnOriginOffset: External offset is also named as common origin offset, it is used to
record the temporary adjustment values of all the workpiece origin and works in all of the
workpiece coordinates.
6) Manual Param:
Manu Slow Spd: In low-speed motion mode, the speed value of the manual mobile
machine‟s axis is executed.
Manu Fast Spd: In high-speed motion mode, the speed value of the manual mobile
machine‟s axis is executed.
Manu Dist:
①
Manual distance (Set distance in manual),
②
Low speed grid (Point
distance of working in low-speed mode),
③
High speed grid (Point distance of working in
high speed).
Manu Type:
①
Tradition (traditional Manual motion),
②
Point movement (Manual motion
of pointing).
7) Array Param:
XDirCnt: The array number along X axis
YDirCnt: The array number along Y axis.
Interval: System defaults 0, it means not wait.
X Space: The space along X axis (Unit: mm).
Y Space: The space along Y axis (Unit: mm).
Total Processing times= X count * Y count
During processing, if user wants to change processing materials after completion of
each processing, needs to set time interval as a negative number.
When the first time processing is completed, the screen prompt “Waiting for the next
array
processing…”, at this moment, user should press any key to start the next array
processing, if user doesn‟t press any key, the system will keep waiting.
Starting array work, press“
”, the system prompts advanced processing list,
