北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd
Forging ahead, create future together!
44
press
“
”to choose the save position and then press “
” to save, system
auto go to standard interface. If we want to continue processing from the breakpoint, we
can choose the combination button “
” + “1-8”. First press “
” and not
release it, at the same time press number button(1-8), then release together, the system
will start processing from the breakpoint.
For example: You want to start processing from the breakpoint 1, then you should
use the combination button “
” + “
”, system will restore processing from
breakpoint 1. Take the
“1nTest.cnc” as example, it has 6705 lines of G code, The screen
shows below,
Press “
”for reviewing, afterwards it shows the break line number:
Press“
”prompts the processing information list, user can modify according
to real needs, then press“
”, the system will restore running at that point.
If user
Break List
1:1nTest.cnc
2:Empty
3:Empty
Line NO. 48
