北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd
Forging ahead, create future together!
36
2
）
OptCheck (Manual test input port)
In the bottom row, the former 4 numbers
1
,
2
,
3,4
corresponding to Spindle ON/OFF,
Multi-speed 1, Multi-speed 2, Multi-speed 3;
The number 5 and 6 are respective to alarm lamp, run lamp. The number 7 and 8 are
user definable output signals. The port definitions will be a little different in individual
custom system.
Manually control the corresponding
output port by pessing “
” to change the
corresponding letter to H. For example, press “
” to highlight number 1 position to
start
the spindle, then press “
” again to stop the spindle.
3
）
Volt Lvl (Voltage Setup)
Used to set the input, output signal port normally open or normally closed port state,
system defines “
↓
” as normal open; “
↑
” as normal closed.
Including 2 rows of arrows:
Setting:
Press “
” move to left or right in the row. Press“
” can jump up and
