北京锐志天宏科技股份有限公司
Beijing RichAuto S&T Co., Ltd
Forging ahead, create future together!
60
Coordinate value changes on screen, but the machine does not move
1) If it is one axis not moving, it maybe wiring problem. Change another normal terminal
to this axis wiring terminal, if it moves properly indicating the rear parts of motor driver
have no problem. Check if there is something wrong with interface board or 50-pin
cable. If it is still not moving, it is necessary to detect the corresponding drive and
motor.
2) If all axes are not moving, firstly, check if there are problems in the 50-pin cable and
interface board,; secondly, if the interface board and 50-pin cable are normal, then
user should check the power supply of the motor drivers.
3) If debugged all above parts, but the machine still not move, then the mechanical parts
should be checked.
It is normal to the move from one position to another position, but when return from
that position to the original position is not normal
Mechanical assembly problem, guide screw may be not installed well.
Motor moving direction is wrong
1) Exchange A+&A- or B+&B- cable of the stepper motor
2) Change motor direction mask (not recommend)
The machine vibrates when moves in arc or two-axis linkage movement
1)
Check whether the machine is placed horizontally
2)
Check if the coupling units loose or not.
3)
Increasing the “start speed”, avoid the resonance point.
PS2.3 Electrical components and wiring problem
A single axis or multi axis can only in one direction after machine power on
