24
IIIIII
IIII
II
Fig. 8:
Disengaging and engaging of the carriage.
1. To move the garage door, manually pull on the pull cord (I) on the carriage.
2. Disconnect the carriage from the toothed belt.
3. The garage door can now be moved manually.
4. If you want to move the gate manually for a long time, you can insert the locking pin (II) in the hole (III) of the carriage. To restore normal operation, remove the locking pin (II) from the hole.
4.6
connections of safeties and commands
DANGER
Hazardous voltage
Pull out the plug from the mains socket before you open the cover of the drive head.
Do not connect any live wire. Only connect clean contacts.
After connecting all cables, close the cover of the drive head.
WARNING
Danger by optical radiation!
Sight can be severely damaged by looking directly at a LED light for a short time. This can cause serious injuries.
Do not look directly the LED light.
To reach the connection terminals, open the service flap of the drive head.
Afterwards, loosen both screws of the drive head cover and remove it.
Fig. 9:
Open the drive head cover
G
B
