O P E R A T I O N
Multicast Streaming
350-9047 v3.0.1
DGy Model 201x User’s Guide
67
. . . . .
SETTING UP A
. . . . . . . . .
MULTICAST SERVER
Follow the steps below to setup the multicast server.
•
Click on the
Stop
button to halt playback or record.
•
If the simultaneous control panel is open, close it and open the
standard
DGy Control Panel.
•
Click on
Options
and select the
Streaming
tab. Default
parameters for
Multicast Stream In
and
Multicast Stream Out
are
displayed. To change the stream out
IP Address
or
Port Number
,
double-click on the respective field and enter the desired value.
•
To use interframe compression, click the button on the
Streaming
tab to display the interframe compression adjustment
window. See page 45 for a description of the window and for a
full discussion of interframe compression use. After settings
have been made, close the window.
•
Close the
Options
Window.
•
On the streaming control panel, click the
Select Live Input
button.
•
On the streaming control panel click the
Send Multicast Stream
button. The
Multicast Stream Info
window for the output shown
below will open.
Figure 3-29
Multicast Stream Out Info
•
Stop the multicast stream out by pressing the
Stop
button on
the
DGy Control Panel Player
screen.
SETTING UP A
. . . . . . . . .
MULTICAST CLIENT
Each
DGy 201x
designated a client to receive the multicast transmission
needs to select the proper Stream In IP address and port number that
were assigned on the DGy multicast server.
Follow the steps below to setup the multicast client.
•
Click on the
Stop
button to halt all playback.
•
If the simultaneous control panel is open, close it and open the
standard
DGy Control Panel
.
•
Click on
Options
and select the
Streaming
tab.
