background image

O P E R A T I O N

Playing Clips

350-9047 v3.0.1

DGy Model 201x User’s Guide

64

. . . . .

7. 

As required, click the

 Pause

 button to pause recording, or the

 

Stop

 button to stop recording. Once stopped, the recording can 

be played back. Refer to the 

Playing Clips

 section on page 64 

for details.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

P L A Y I N G   C L I P S

Before proceeding with this setup, refer to 

Before Starting

 on page 24 

for important setup and connection information.

To play back a clip from an optional remote disk drive connect to the disk 
using the procedure described in the 

Mounting a Remote Disk Option

 

section on page 61.

C H O O S I N G   A   P L A Y B A C K   D R I V E

Playing back a recording can be done from the removable drive, optional 
fixed drive, or from a remote drive using the optional NFS mount.

1.

If the 

Clip Browser

 is not open, open it from the 

DGy Control 

Panel

 by clicking 

Clip Path

. See 

Clip Browser Window

 on page 

35.

2. 

Use the left pane of the browser (

Figure 3-6

) to navigate to the 

drive and folder that contains the desired clip. 

The removable drive is named /remov and the remote drive 
(NFS) is named /remot. Do not to confuse the names.

P L A Y B A C K   A   C L I P

Use the following steps to play back a clip with 

DGy 201x

.

1.

If a clip was just recorded on the 

DGy Control Panel

, simply 

click the

 Play

 button to play back the same clip. 

2. 

To play back a different

 

clip, click the

 Clip Name

 label to display 

the

 Clip Browser

 

window

.

3. 

In the 

Clip Browser

, highlight the desired clip and click 

Select

The clip is transferred to the 

Clip Name

 

field

 

in the 

DGy Control 

Panel

. Click the 

Play

 button.

OR

Double click the desired clip name in the Clip Browser window 
to immediately begin play.

Note

The Player/Recorder must be stopped before a clip 
selection can be made.

Summary of Contents for DGy 201x































































































































































Reviews: