O P E R A T I O N
Options Window
350-9047 v3.0.1
DGy Model 201x User’s Guide
42
. . . . .
. . . . . . . . .
PLAYBACK TAB
The figure below shows the
Options
window with the
Playback
tab
selected
.
Figure 3-11
Playback Tab
F I N D C L I P B Y T I M E C O D E
When a recording is made the recording is stamped with a
timecode. The
Playback
tab provides the ability to go directly to
a timecode position providing random access to any point within
a clip. This is equivalent to the
RealTimeSeek
command.
Seeking to a timecode can be done when the
DGy 201x
is in
either
Play
,
Pause
or
Stop
mode.
Use the following procedure to go to a specific timecode:
1)
From the
DGy Control Panel
(
Figure 3-1
) click on the
Options
button.
2)
In the
Options
window select the
Playback
tab.
3)
Select the date of the clip by entering directly into the
Date
field or using the spin controls.
4)
Select the desired seek time by entering it directly into the
Time
field or use the spin controls.
5)
Click on the
Go
button.
6)
The
DGy 201x
will cue to the specified timecode if the
timecode is within the scope of the current clip.
7)
Click on
Play
to commence playback from the specified
point.
