Rexroth Indramat DURADRIVE SYSTEM200, Project Planning Manual

Page: 65 / 86

RECO PLC ISP200-R/G2 Serial Interfaces
12-3
DOK-CONTRL-MTS-R0*.2G2-PR01-EN-P
12.4 Technical Data
Supply
Supply voltage: 4.5 to 5.5 VDC
Power consumption: Max. 250 mA
Interface data
Input capacity: Max. 15 pF
Input leakage current: Max. 5 µA
Output capacity: Min. 150 pF
Output current (switching actively 0): Min. 12 mA
12.5 Interface Assignment
The assignments of the serial interfaces are as follows:
PIN Signal name PIN Signal name
1 DCD / Data Carrier Detect 2 RxD / Receive Data
3 TxD / Transmit Data 4 DTR / Data Terminal Ready
5 SGND / Ground 6 DSR / Data Set Ready
7 RTS / Ready To Send 8 CTS / Clear To Send
9 RI / Ring Indicator
Fig. 12-4: Pin assignment of RS 232C X35, X36
PIN Signal name PIN Signal name
1 GND / Frame Ground 2 NC
3
TxD A (-) / Transmit Data
4
RxD A (-) / Receive Data
5 SGND / Signal Gound 6 RxD B (+) / Receive Data
7 RTS / Ready To Send 8 CTS / Clear To Send
9 TxD B (+) / Transmit Data
Fig. 12-5: Pin assignment of RS422/485 X40, X41