manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 90

2.20

CRUISE CONTROL/SPEED LIMITER: cruise control function 

(3/4)

Exceeding the cruising speed

The cruising speed may be exceeded 

at any time by depressing the accelera-

tor pedal. While it is being exceeded, 

the cruising speed flashes on the in-

strument panel.
Then, release the accelerator: after a 

few seconds, the vehicle will automati-

cally return to its set cruising speed.

Cruising speed cannot be 

maintained

When driving down a steep gradient, 

the system is unable to maintain the 

cruising speed: the stored speed will 

flash on the instrument panel informa-

tion display to inform you of this situ-

ation.

Adjusting the cruising speed

The cruising speed may be changed by 

pressing the following repeatedly:
– switch 

2

 (+) to increase the speed,

– switch 

3

 (-) to decrease the speed.

The cruise control function 

is in no way linked to the 

braking system.

2

3

4

5

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands