manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 170

5.30

On the road

POSSIBLE CAUSES

WHAT TO DO

Steering becomes heavy.

Assistance overheating.

Consult an approved Dealer.

The engine is overheating. The cool-

ant temperature indicator and the 

® 

warning light come on.

Engine cooling fan not working.

Stop the vehicle, switch off the engine and 

contact an approved Dealer.

Coolant leaks.

Check the coolant reservoir: it should con-

tain fluid. If there is no coolant, consult an 

approved Dealer as soon as possible.

OPERATING FAULTS 

(3/5)

Radiator: 

If there is a lack of coolant, remember that it must never be topped up using cold coolant while the engine is 

very warm. After any procedure on the vehicle which has involved even partial draining of the cooling system, it must 

be refilled with a new mixture prepared in the correct proportions. Reminder: only products approved by our Technical 

Department may be used for this purpose.

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands