manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 113

3.19

ELECTRIC WINDOWS 

(2/2)

4

Rear screen window winder 

4

– Press switch 

4

 to open the rear 

screen 

A

.

– Lift  switch 

4

 to close the rear 

screen 

A

.

It is strictly forbidden to rest 

any objects against the rear 

screen, with the sliding sun-

roof open, as there is a risk 

that the window winder mechanism 

may be broken or damaged.

A

The tailgate window can be fully 

open or fully closed: there is no in-

termediate position.

using the remote control

Pressing button 

5

 briefly completely 

lowers or raises the rear screen.

5

The permissible load on the tailgate 

with the window lowered is 50 kg.

Driver’s responsibility

Closing windows can cause 

serious injury.

If any part of the body (arm, 

hand, etc.) becomes trapped, re-

verse the direction of the window 

immediately by pressing the rele-

vant switch.

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands