manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 53

1.47

Examples of selections

Interpreting the display selected

Estimated range with remaining fuel

This range takes into account the average fuel consumption since the last time the reset 

button was pressed.
The value is displayed after driving 400 metres.
Several minutes after the reserve light has come on (refer to the information on the 

“Instrument panel”), the estimated range will no longer be displayed.

RANGE

- - - - KM

Distance travelled

 since the last reset.

DISTANCE

0.0 KM

Average speed

 since the last reset.

The value is displayed after driving 400 metres.

AVERAGE

- - -. - KM/H

TRIP COMPUTER AND WARNING SYSTEM: trip parameters 

(2/4)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands