manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 151

5.11

Front fog lights 

1

As it is necessary to remove parts or 

components (front bumper), 

you are 

advised to have your bulbs replaced 

by an approved dealer

.

Bulb type:

 

H11

Additional lights

If you wish to fit your vehicle with fog 

lights or long range headlights, consult 

an approved Dealer.

FOG LIGHTS: changing bulbs

1

The engine may be hot 

during operations in close 

proximity. In addition, the 

engine cooling fan may 

start at any moment.
Risk of injury.

Any operation on (or modi-

fication to) the electrical 

system must be performed 

by an approved dealer 

since an incorrect connection might 

damage the electrical equipment 

(harness, components and in partic-

ular the alternator). In addition, your 

Dealer has all the parts required for 

fitting these units.

Rear fog lights 

2

As it is necessary to remove parts or 

components (rear bumper), 

you are 

advised to have your bulbs replaced 

by an approved dealer.
Bulb type:

 

P21 W

2

The bulbs are under pres-

sure and can break when 

replaced.
Risk of injury.

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands