manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 134

4.10

LEVELS 

(3/3)

/FILTERS

Windscreen washer reservoir

Topping up

Engine switched off:
– unscrew cap 

3

;

–  fill until you can see the fluid;
–  close the cap.

Liquid

Screen wash product (product with an-

tifreeze in winter).

Jets

To adjust the height of the windscreen 

washer jets, use a tool such as a flatb-

lade screwdriver.

Filters

The replacement of filter elements (air 

filter, passenger compartment filter, 

diesel filter, etc.) is scheduled in the 

maintenance operations for your vehi-

cle.

Replacement intervals for filter el-

ements: 

refer to the Maintenance 

Service Booklet for your vehicle.

The engine may be hot 

when carrying out opera-

tions in close proximity. In 

addition, the engine cooling 

fan can come on at any moment.
Risk of injury.

3

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands