manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 61

1.55

é

Hazard warning lights

Press switch 

3

. This switch ac-

tivates all four direction indicators and 

the side indicator lights simultaneously. 

It must only be used in an emergency to 

warn other drivers that you have had to 

stop in an area where stopping is pro-

hibited or unexpected, or that you are 

obliged to drive under special condi-

tions.
Depending on the vehicle, the hazard 

warning lights may come on automati-

cally under heavy deceleration. You can 

switch them off by pressing switch 

3

.

Direction indicators

Move stalk 

1

 parallel to the steering 

wheel and in the direction you are going 

to turn it.
When driving on the motorway, the 

steering wheel is not often turned 

enough to return the stalk automatically 

to 

0

. There is an intermediate position 

in which the stalk may be held when 

changing lanes.
When the stalk is released, it automati-

cally returns to 

0

.

Horn

Press at one of the locations 

2

.

Headlight flasher

Pull stalk 

1

 towards you to flash the 

headlights.

AUDIBLE AND VISUAL SIGNALS

2

3

1

0

1

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands