Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 131

Page: 131 / 198

4.7

Engine oil change:

if you

are changing the oil when

the engine is hot, be careful

not to scald yourself if the

oil overflows.

ENGINE OIL LEVEL: topping up/filling

(2/2)

/OIL CHANGE

Oil change

Service interval:

refer to the

Maintenance Service Booklet for your

vehicle.

Average capacities for oil change

including oil filter

(for information)

1.6 16V engine: 4.8 litres

1.5 dCi engine: 4.5 litres

Engine oil grade

Refer to the Maintenance Service

Booklet for your vehicle.

Consult your approved Dealer at

once if you notice an abnormal or

repeated drop in any of the fluid

levels.

Never run the engine in an

enclosed space as exhaust

gases are poisonous.

Filling:

take care when

topping up the oil that

no oil drips onto engine

components - risk of fire.

Remember to refit the cap securely

as there is a risk of fire if oil splashes

onto hot engine components.

The engine may be hot

when carrying out opera-

tions in close proximity. In

addition, the engine cooling

fan can come on at any moment.
Risk of injury.

Summary of Contents for KANGOO BE BOP







































































































































































































Search results

Summary of Contents for KANGOO BE BOP

Reviews:

Brands by name

Popular brands

Renault KANGOO BE BOP, Driver'S Handbook Manual

Search results

Summary of Contents for KANGOO BE BOP

Reviews:

Brands by name

Popular brands