manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 150

5.10

Cleaning the headlights

As the headlights are made of plastic 

glass, use a soft cloth or cotton wool 

to clean them. If this does not clean it 

properly, moisten the cloth with soapy 

water, then wipe clean with a soft damp 

cloth or cotton wool.
Finally, 

carefully 

dry off with a soft dry 

cloth.

Cleaning products containing 

alcohol must not be used under any 

circumstances.

To comply with local legislation, or as 

a precaution, you can obtain an emer-

gency kit containing a set of spare bulbs 

and fuses from an approved Dealer.

Front side light

Open flap 

A

 under the wheel arch. Turn 

the wheel in towards the vehicle to fa-

cilitate access to the flap.
Turn bulb holder 

4

 to unlock it and 

remove it from its location, without dis-

connecting the wiring. Replace the 

bulb.

Bulb type:

 

P21/5W

To refit it, carry out the above opera-

tions in reverse order.

Direction indicator lights

Open the flap 

A

 in the wheel arch. Turn 

the wheel in towards the vehicle to fa-

cilitate access to the flap.
Turn bulb holder 

5

 to unlock it and 

remove it from its location, without dis-

connecting the wiring. Replace bulb .

Bulb type:

 

PY21W

To refit it, carry out the above opera-

tions in reverse order.

The bulbs are under pres-

sure and can break when 

replaced.

Risk of injury.

LIGHTS: changing bulbs 

(2/2)

4

5

A

Ensure that the flap is properly se-

cured when refitting.

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands