Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 103

Page: 103 / 198

3.9

Adjusting automatic mode

The system normally operates in auto-

matic mode but you can alter the stand-

ard settings used by the system (air

distribution, etc.). These options are

explained on the following pages.

AUTOMATIC CLIMATE CONTROL

(3/8)

Automatic mode is the recom-

mended mode of use

The automatic climate control

system guarantees comfort in the

passenger compartment and good

visibility (except in the event of ex-

treme conditions), while optimising

consumption.
The types of adjustments that can

be made are described in the follow-

ing pages.
Return to automatic mode as soon

as possible.

The displayed temperature values

show a comfort level.
When starting the engine, increas-

ing or decreasing the value dis-

played will not allow the com-

fort level to be reached any more

quickly. The system will always op-

timise the temperature increase or

decrease (the ventilation system

does not start instantly at maximum

speed: it gradually increases). This

may take several minutes.
Generally speaking, unless there is

a particular reason not to, the dash-

board air vents should remain open.

Summary of Contents for KANGOO BE BOP







































































































































































































Search results

Summary of Contents for KANGOO BE BOP

Reviews:

Brands by name

Popular brands

Renault KANGOO BE BOP, Driver'S Handbook Manual

Search results

Summary of Contents for KANGOO BE BOP

Reviews:

Brands by name

Popular brands