manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 126

4.2

To open, pull handle 

1

, located on the 

left-hand side of the dashboard.

The engine may be hot 

when carrying out opera-

tions in close proximity. In 

addition, the engine cooling 

fan can come on at any moment.
Risk of injury.

1

2

4

5

3

Opening the bonnet

Lift the bonnet up and release stay 

4

 

from its holder 

5

. For your own safety, 

it is 

very important

 to fit the stay into 

its retainer 

3

. Check that it is correctly 

locked.

In the event of even a slight 

impact involving the radia-

tor grille or bonnet, have 

the bonnet lock checked by 

an approved Dealer as soon as pos-

sible.

BONNET 

(1/2)

Unlocking the bonnet catch

Lift the bonnet by several centimetres 

and push lever 

2

 to the left.

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands