manualshive.com logo in svg

Renault KANGOO BE BOP, Driver'S Handbook Manual

Share
Download
Renault KANGOO BE BOP Driver'S Handbook Manual Download Page 85

2.15

The speed limiter function helps you 

stay within the driving speed limit that 

you choose, known as the 

limit speed

.

CRUISE CONTROL/SPEED LIMITER: speed limiter function 

(1/3)

2

4

5

3

Switching on

Press switch 

1

 on the side showing 

. The 

 indicator light comes on, 

lit orange, and the message “speed lim-

iter” appears on the instrument panel, 

accompanied by dashes to indicate that 

the speed limiter function is activated 

and waiting to store a limit speed.

To store the current speed, press 

switch 

2

 (+) or 

3

 (-): the limit speed will 

replace the dashes.

The minimum stored speed is 20 mph 

(30 km/h).

1

Controls

1 

Main “On/Off” switch.

2

  Limit speed activation, storage and 

increase switch (+).

3

  Limit speed activation, storage and 

decrease switch  (-).

4

  Switching the function off (with limit 

speed storage) (O).

5

  Stored limit speed activation, stor-

age and recall (R).

Summary of Contents for KANGOO BE BOP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands