After selecting the correct letter, number or special
character, press the "Next" icon to store the next
character or letter. The "Delete" icon removes
incorrectly stored entries. Once you have entered
the password correctly, confirm the input with the
"Save" icon.
Fig. 36: Enter password
Once all parameters for your WLAN network have
been correctly saved, the heat pump will connect
with your network. You can check this via the "Net-
work USB" parameter. "Connect" must be dis-
played here (if all data is correct). To view the heat
pump data on a smartphone, tablet or laptop,
make a note of the IP address that comes after the
identifier "connected".
( )
*** ** * **
. . .
********
Fig. 37: Status enquiry
WLAN function
After the parameters described above have been
set, activation is complete. To return to the basic
display, exit the parameter level via the arrow at
the top left or touch the basic display symbol.
To connect the REMKO Smart-Control Touch
with your router, the WLAN network must be
received by the controller with sufficient signal
strength!
41
