When you enter the address provided in your web
browser, you access the basic display of your heat
pump controller shown below. You now have the
option of controlling the relevant operating parame-
ters for the user and expert level of your REMKO
heat pump via a PC, laptop or smartphone.
Fig. 38: Basic display
This function is available to you constantly whilst
connected to the WLAN network of your router.
Outside of your network, you have no further
access to the parameters of your controller.
If you require the option of accessing the parame-
ters of your controller outside of the actual WLAN
network, this is only possible with the REMKO
Smart-Web function.
This supplementary software can be additionally
ordered with the EDP no. 248120 and installed on
the Smart-Control Touch controller.
Please observe the separate operating instructions
for the REMKO Smart-Web function in this regard.
In order to gain access to the regulation parame-
ters of your controller, enter the IP address found
beneath the status in the address field of your
internet browser and connect with the Smart-Con-
trol Touch controller.
( )
*** ** * **
. . .
********
Fig. 39: Read off IP address
REMKO Smart-Control Touch
42
